Energy Combustion
Ramol, Ahmedabad, Gujarat
SEND SMS
SEND EMAIL
Energy Combustion Ahmedabad importer of all types of ignition electrodes. All size Ignition Electrode available in ex-stock.Also Develop Ignition Electrode as per customer's specification or design.
we have below size Ignition Electrode.
Ignition electrodes
are used for the ignition of gaseous fuel in gas combustion equipment, which works on the principle of ignition by high-voltage flashover. The central electrode must not be permanently positioned in the flame. The ignition electrode and the ionisation probe are usually positioned together in the combustion chamber of the gas combustion equipment - gas-fired boilers, instantaneous water heaters, gas ranges, cookers etc. Ignition electrodes can be used as ionisation probes and vice versa. However their layout should always be respected, i.e. the ignition electrode must be out of the flame and only the central electrode in the flame. Ignition electrodes and ionisation probes are manufactured of high-quality materials. The insulator is made of the OXAL ceramics with high Al2O3 content. Characteristic features of this material are high mechanical strength and resistance to thermal and electrical load (electric strength of the insulator is 18kV). The central electrode is made of a special fire-proof material (kanthal) which is resistant to high temperatures and electrochemical corrosion.
Product Details:
| Size: Reach | 20.5 mm |
| Type | Spark Plug |
| Voltage | 110V-250V |
Energy Combustion Ahmedabad importer of all types of ignition electrodes. All size Ignition Electrode available in ex-stock.Also Develop Ignition Electrode as per customer's specification or design.
we have below size Ignition Electrode.
Ceramic Length 100 mm , 125 mm , 150 mm, Kanthal length 100 mm ,125 mm , 150 mm
Ignition electrodes
are used for the ignition of gaseous fuel in gas combustion equipment, which works on the principle of ignition by high-voltage flashover. The central electrode must not be permanently positioned in the flame. The ignition electrode and the ionisation probe are usually positioned together in the combustion chamber of the gas combustion equipment - gas-fired boilers, instantaneous water heaters, gas ranges, cookers etc. Ignition electrodes can be used as ionisation probes and vice versa. However their layout should always be respected, i.e. the ignition electrode must be out of the flame and only the central electrode in the flame. Ignition electrodes and ionisation probes are manufactured of high-quality materials. The insulator is made of the OXAL ceramics with high Al2O3 content. Characteristic features of this material are high mechanical strength and resistance to thermal and electrical load (electric strength of the insulator is 18kV). The central electrode is made of a special fire-proof material (kanthal) which is resistant to high temperatures and electrochemical corrosion.
Product Details:
| Minimum Order Quantity | 10 Piece |
| Electrode Material | KANTHAL WIRE |
| Length | AS PER CUSTOMER REQUIREMENT |
| Electrode Diameter | 8 MM , 10 MM , 12 MM , 14 MM |
Energy Combustion Ahmedabad importer of all types of ignition electrodes. All size Ignition Electrode available in ex-stock.Also Develop Ignition Electrode as per customer's specification or design.
we have below size Ignition Electrode.
• 8 mm ceramic dia
• E2 Series 12 mm ceramic dia
• E4 series 14 mm ceramic dia
• H-type electrode
• Plug Type Ignition electrode
• VD Electrode
• Kiln Burner Electrode
• Eclipse Burner Electrode
Ceramic Length 100 mm , 125 mm , 150 mm, Kanthal length 100 mm ,125 mm , 150 mm
Ignition electrodes
are used for the ignition of gaseous fuel in gas combustion equipment, which works on the principle of ignition by high-voltage flashover. The central electrode must not be permanently positioned in the flame. The ignition electrode and the ionisation probe are usually positioned together in the combustion chamber of the gas combustion equipment - gas-fired boilers, instantaneous water heaters, gas ranges, cookers etc. Ignition electrodes can be used as ionisation probes and vice versa. However their layout should always be respected, i.e. the ignition electrode must be out of the flame and only the central electrode in the flame. Ignition electrodes and ionisation probes are manufactured of high-quality materials. The insulator is made of the OXAL ceramics with high Al2O3 content. Characteristic features of this material are high mechanical strength and resistance to thermal and electrical load (electric strength of the insulator is 18kV). The central electrode is made of a special fire-proof material (kanthal) which is resistant to high temperatures and electrochemical corrosion.
Product Details:
| Minimum Order Quantity | 25 Piece |
| Electrode Diameter | 8 MM , 10 MM , 12 MM , 14 MM |
| Length | Customized |
Energy Combustion Ahmedabad importer of all types of ignition electrodes. All size Ignition Electrode available in ex-stock.Also Develop Ignition Electrode as per customer's specification or design.
we have below size Ignition Electrode.
• 8 mm ceramic dia
• E2 Series 12 mm ceramic dia
• E4 series 14 mmceramic dia
• H-type electrode
• Plug Type Ignition electrode
• VD Electrode
• Kiln Burner Electrode
• Eclipse Burner Electrode
Ceramic Length 100 mm , 125 mm , 150 mm, Kanthal length 100 mm ,125 mm , 150 mm
Ignition electrodes
are used for the ignition of gaseous fuel in gas combustion equipment, which works on the principle of ignition by high-voltage flashover. The central electrode must not be permanently positioned in the flame. The ignition electrode and the ionisation probe are usually positioned together in the combustion chamber of the gas combustion equipment - gas-fired boilers, instantaneous water heaters, gas ranges, cookers etc. Ignition electrodes can be used as ionisation probes and vice versa. However their layout should always be respected, i.e. the ignition electrode must be out of the flame and only the central electrode in the flame. Ignition electrodes and ionisation probes are manufactured of high-quality materials. The insulator is made of the OXAL ceramics with high Al2O3 content. Characteristic features of this material are high mechanical strength and resistance to thermal and electrical load (electric strength of the insulator is 18kV). The central electrode is made of a special fire-proof material (kanthal) which is resistant to high temperatures and electrochemical corrosion.
Product Details:
| Material | Alumina |
| Type | Gas Heater Parts |
| Size | Customised |
Product Details:
| Type | Piezoelectric Ceramics |
| Material | Alumina Ceramic |
| Application | Industrial Ceramic |
Product Details:
| Type | Piezoelectric Ceramics |
| Material | Alumina |
| Length | Customizable |
Energy Combustion Ahmedabad importer of all types of ignition electrodes. All size Ignition Electrode available in ex-stock.Also Develop Ignition Electrode as per customer's specification or design.
we have below size Ignition Electrode.
Ceramic Length 100 mm , 125 mm , 150 mm, Kanthal length 100 mm ,125 mm , 150 mm
Ignition electrodes
are used for the ignition of gaseous fuel in gas combustion equipment, which works on the principle of ignition by high-voltage flashover. The central electrode must not be permanently positioned in the flame. The ignition electrode and the ionisation probe are usually positioned together in the combustion chamber of the gas combustion equipment - gas-fired boilers, instantaneous water heaters, gas ranges, cookers etc. Ignition electrodes can be used as ionisation probes and vice versa. However their layout should always be respected, i.e. the ignition electrode must be out of the flame and only the central electrode in the flame. Ignition electrodes and ionisation probes are manufactured of high-quality materials. The insulator is made of the OXAL ceramics with high Al2O3 content. Characteristic features of this material are high mechanical strength and resistance to thermal and electrical load (electric strength of the insulator is 18kV). The central electrode is made of a special fire-proof material (kanthal) which is resistant to high temperatures and electrochemical corrosion.
Product Details:
| Type | Piezoelectric Ceramics |
| Material | Alumina |
| Size | Customize |
Energy Combustion Ahmedabad importer of all types of ignition electrodes. All size Ignition Electrode available in ex-stock.Also Develop Ignition Electrode as per customer's specification or design.
we have below size Ignition Electrode.
Ignition electrodes
are used for the ignition of gaseous fuel in gas combustion equipment, which works on the principle of ignition by high-voltage flashover. The central electrode must not be permanently positioned in the flame. The ignition electrode and the ionisation probe are usually positioned together in the combustion chamber of the gas combustion equipment - gas-fired boilers, instantaneous water heaters, gas ranges, cookers etc. Ignition electrodes can be used as ionisation probes and vice versa. However their layout should always be respected, i.e. the ignition electrode must be out of the flame and only the central electrode in the flame. Ignition electrodes and ionization probes are manufactured of high-quality materials. The insulator is made of the OXAL ceramics with high Al2O3 content. Characteristic features of this material are high mechanical strength and resistance to thermal and electrical load (electric strength of the insulator is 18kV). The central electrode is made of a special fire-proof material (kanthal) which is resistant to high temperatures and electrochemical corrosion.
Product Details:
| Minimum Order Quantity | 10 Number |
| Material | Alumina Ceramic |
| Application | Industrial |
| Type | Ceramic Parts |
Energy Combustion Ahmedabad importer of all types of ignition electrodes. All size Ignition Electrode available in ex-stock. Also Develop Ignition Electrode as per customer's specification or design.
we have below size Ignition Electrode.
• 8 mm ceramic dia
• E2 Series 12 mm ceramic dia
• E4 series 14 mmceramic dia
• H-type electrode
• Plug Type Ignition electrode
• VD Electrode
• Kiln Burner Electrode
• Eclipse Burner Electrode
Ceramic Length 100 mm , 125 mm , 150 mm, Kanthal length 100 mm ,125 mm , 150 mm
Ignition electrodes
are used for the ignition of gaseous fuel in gas combustion equipment, which works on the principle of ignition by high-voltage flashover. The central electrode must not be permanently positioned in the flame. The ignition electrode and the ionisation probe are usually positioned together in the combustion chamber of the gas combustion equipment - gas-fired boilers, instantaneous water heaters, gas ranges, cookers etc. Ignition electrodes can be used as ionisation probes and vice versa. However their layout should always be respected, i.e. the ignition electrode must be out of the flame and only the central electrode in the flame. Ignition electrodes and ionisation probes are manufactured of high-quality materials. The insulator is made of the OXAL ceramics with high Al2O3 content. Characteristic features of this material are high mechanical strength and resistance to thermal and electrical load (electric strength of the insulator is 18kV). The central electrode is made of a special fire-proof material (kanthal) which is resistant to high temperatures and electrochemical corrosion.
Product Details:
| Minimum Order Quantity | 10 Number |
| Length | As per requirements |
| Electrode Type | Furnace Electrode |
| Electrode Diameter | Developing as per requirements and dimensions |
